Rebel Vape is a company that has produced high-end vape mods since 2015 using Evolv’s DNA boards as well as Yihi.
Rebel Mods use a 3d printing process using a nylon material for their cases and is hand-assembled by trained technicians.
How Good Is Rebel Vape?
Rebel Vape is known for their Lightweight, high quality 3D printed vapes, aimed at the high end market, powered by Evolv DNA and YiHi Chipsets, the industry’s leading manufacturers. Rebel are well reviewed and have some of the lightest, most hard wearing and powerful devices available.
The Quality Of Rebel Vape
Rebel Vape’s designs and the materials used create a great feeling while having many different options in sizes and battery configuration. The construction is of high details SLS 3D printed bodies, using industry powered chipsets.
The Quality comes from the way each mod is printed as well as the hand assembly and finishing process combined with the boards used to regulate and maintain power. Whilst their have been some concerns about QC in the early years, their operation now has a 4 stage Quality control process, with all devices being hand tested and signed off by engineers.
The reason why Rebel uses Evolv and Yihi boards are due to the reliability and overall quality in performance giving the customer a great performing product.
Are Rebel Mods Reliable & Safe?
Rebel Vape uses the most reliable boards available within the market with a high-efficiency rating and built-in safety features to prevent short-circuiting and overheating.
There have not been many reports regarding safety due to the boards used but there have been some regarding. However in many cases this can be due to liquid damage or improper use.
Rebel Mods are extremely hard wearing. Reviewers have attacked them with a hammer, thrown them across a room, and even reports of being dropped from buildings, and still function. This is not to say this is recommended to do, and certainly not covered under warranty!
These devices are not like your typical mass-produced devices meaning more care and attention is needed to make the product last.
What Are Rebel Vape Mods Made From?
Rebel Mods are made from a 3d printing process typically used by car manufactures for printing prototype components due to the high level of precision, strength, and lightness.
This process uses a high-density laser to create each layer, not unlike standard 3d printers which use filaments as the base material, This process uses a Nylon powder blend combined with the laser fusing each layer to create the semi-finished design.
Rebel Vape uses Evolv’s highly reliable DNA board as well as the popular Yihi board to maintain power and regulate the device, these options were chosen due to the reliability, functionality, and efficiency of the board regulating power.
Some of the board options for Evolv are a DNA 75w capable of 1 – 75w. This board does not come with a full colors screen like the 75c version.
The Rebel Mod 75c Version is Evolv’s upgraded version has an increase in efficiency as well as has a fully customizable interface from the color screen making this option more popular with many users due to the customization.
Both these versions are typically powered by a single battery from 20650, 18650, 20700, or 21700.
The Rebel Mod DNA 167 is a more powerful version of the 75w and can come in different configurations depending on how many batteries are chosen to be connected.
Typically most devices that use the 167 board use two batteries either a pair of 18650’s or 20700/ 21700, this configuration will have a maximum wattage output of 167 watts.
Where Are Rebel Products Made?
Each Rebel Vape device is hand-assembled in England, The UK, with the boards coming from the US and Japan. 3d printed components are from various large 3d printing facilities.
Is It Just Plastic?
It is not just plastic, the material used is a pa12 / pa11 nylon polymer making it light but a strong material with UV resistant properties as well as having a unique texture making it feel better when holding.
Here are just some of the most popular Rebel Vape mods:
Rebel Mod DNA 75c uses a single 18650 or 2060 battery, and they also offer a 2×700 version
Rebel Mod DNA 60 Using a single 20700 or 21700 battery. Also known as a SBS (Side by Side). This option can be customized with different panel color options to make the device fit your style or favorite color
Rebel Mod 250c v2 uses dual 18650 batteries combined with the Evolve 250c board making it a great choice if you are looking for something lightweight and stylish with a minimalist design. Again it also comes in a 2×700 configuration.
Rebel Mod DNA 75c 2×700 this option is a great choice for a small and compact device with a very reliable board maintaining power as well as having the option to fully customize the theme and layout to make the product more your style.
This device uses a single 20700 or 21700 battery of your choice and typically has a better battery life of 18650 due to the larger capacity of the battery. Typically the Rebel Vape DNA 75c 2×700 costs from $195
There are many other options and configurations within the Rebel Vape Brand to suit your best need and style.
Rebel Vape also uses Yihi boards which are originally manufactured and designed in Japan they also boast have a very high-efficiency rating as well as having a bright color display.
Typically Yihi board costs more and that reflects on the price of Rebel Mods they utilize with a costing of $190 -$310.
Why Are Rebel Vape Mods So Light?
Due to the material used this makes for a very lightweight product as well as maintaining its rigidity combined with the overall design. Their weight ranges from 60g – 85g, almost 3 times lighter than similar CNC machined vapes.
Although a very tough material, it is important to note it can become damaged with knocks or a hard fall. Much like any electronic device, it is worth looking after it as much as possible and it will look after you.
Why Are Rebel Vape Mods Expensive?
The materials and machines used are of the highest standard in the world. To add, the finishing process of Rebel Mods takes time, tools and care. Unlike other 3D printed mods, they offer fade resistant colours which are a premium material and undergo a 4 stage process. There are many aspects that go into making a mod from the design cost of materials and many things in between. Components are custome made, some are gold plated, and all to the highest standard.
If thoiugh they have a high price tag, for what they are, they are cost effective. To design, print and build your own version of the same materials and finish, would cost subtantially more.
Before each version of the mod is released they research and develop their next big hit and listen to what people are looking for in a device, from size, battery availability, board options, and much more to produce a finalized design to put into production.
Each one of the Rebel Vape mods is hand-assembled in the heart of the UK by a team of highly trained technicians to maintain a high standard throughout the assembly process and is then passed to a separate quality team to evaluate the work before packing.
What Is Rebel Vape Warranty Like?
Rebel Vape has a 12-month warranty on their devices with an optional 24 month warranty add on. This covers manufacturer defects and any repair or replacements however does not cover the following.
- Liquid damage
- Drops or fall damaging internal components or the case
- Damage caused by modification
- Accessories
- Software
With Evolve DNA devices if there is an issue with the board you may contact them and have them repair or replace the board on your behalf however depending on the circumstances there may be some fees involved in repair and shipping.
How long Do Rebel Vapes Products last?
Rebel Vapes quality and reliability can make devices last for many years with some owners of Rebel devices having devices lasting over 4 years. The durable and strong print material, means the devices can last as long as you can take care of them.
This can be attributed to regular maintenance by the owner and servicing from Rebel from replacing the screens if damaged to replacing battery contacts that no longer spring back in place.
Can You still Buy Accessories Parts?
With the designs of rebel products, there are many options to have replacement accessories and extra parts.
Rebel Continues to offer replacement doors, 510s, contacts, and screens to maintain the overall level of reliability in many situations. It is not very often that you can get a service/repair for almost any part of your device.
With easy access to accessories and replacements, it is as easy as a few clicks or even just an email to Rebel.
Are Rebel Vape Mods Worth It?
There are many vape mods on the market buy why choose a Rebel Vape? Many would agree that the materials used in construction in each product are much lighter than compared to a similar-sized or power level device.
For example, a Wismech Reloux gen 3 dual is a dual 18650 battery device capable of 230 watts and weighs around 220 grams with batteries installed, compared to the similar-sized Rebel Vape DNA 250c v2 which also uses dual 18650 batteries with an output of 200 watts it only weighs 160 grams.
For many, this is a great feature as a lot of people do not want a bulky and heavy product weighing them down every day.
Unlike some bands that offer similar products, Rebel Vape has a smaller but more active customer support team that is always available and eager to help with issues.
Some people who have had an issue with brands more often than not will not get a response from customer service but with Rebel, they are more than happy to help. Recent reports show customer service offer a same or next day reply.
Where Can You Buy Rebel Vape Mods?
Rebel Vape has been wholesaled throughout many regions and counties over the years but can typically be easily found on the Rebel Vape website or on their partner store Esauce which mainly sells E-liquids, mods, tanks, accessories, and other vaping related items.
In the previous years, Esauce was the main distributor for Rebel Vape mods be for Rebel Vape created their own separate website just offering their products.
Click here to buy and have them shipped anywhere in the world with next day shipping, and as fast as 1-2 express delivery.
What Products Are Similar To Rebel Vapes?
In this market, there are not too many companies making 3d printed mods the same way as a Rebel Vape but there are a few that uses the same boards and have a similar size but are more often havier.
Here are just a few:
The Dovpo Odin series of devices are often compared to Rebel Vape as Dovpo has produced the Odin dual 21700 Evolv DNA 250c as well as making a less expensive version using their own proprietory board controlling the device.
Both the Odin 250c and Rebel Vape’s 2×700 250c share a similar size and shape but the Rebel Vape is substantially lighter and the main part of the weight is from the batteries alone. This can also be said for the Odin Evolv DNA 75c version compared to Rebel Vapes DNA 75c 2×700.
Lost vape also offers simpler devices using Evolve boards but mainly now uses their own proprietary boards in many of their devices.
Lost vape offers a few different options with Evolve board like the Therion BF squonk which uses a DNA 75c board and is powered by a single 18650 battery and the Centaurus using the 250c board and uses dual 18650 removable batteries.
The devices that can be compared are significantly heavier than any of Rebel Vapes this is due to the aluminum alloy used in more mass-produced devices making some devices much heavier and feeling bulky.
With Rebel Vape offering higher-end devices compared to these other brands they are always available and will offer to repair most issues as well as still service older devices that may be outside of warranty.
Are There Any typical Problems With Rebel Vape Products?
With some high-end devices quality and style is the most important thing to be offered by a brand and Rebel Vape maintains that level.
However, there have been some reports of small issues over there years that could be expected from something that is hand-assembled. Its important to note the only issues we could find were quite old. These days it seems all the isues have been resolved.
With earlier models, there have been some reports of loose doors. Rebel recalled or replaced any issues. They stand by a policy of “never turn their back on a customer”. Which is probably why they have so many loyal followers.
Another report mentions that the screen stops working after a year and the report shows the screen on but not showing any information. This is typically caused by excess e-liquid leaking from the atomizer and entering behind the screen and getting in the screen. This is a very easy issue to avoid, however.
This kind of issue can be prevented by making sure if the attached atomizer is leaking to wipe any liquid off and away from the device as quickly as possible, this can be done with a tissue or a vape rag.
There have been reports of broken buttons, which can be the result of a bad knock. But Rebel’s newer devices have no such reports.
One other issue that is mentioned is customer service from 2019 and Rebel not covering something under warranty. There are a few reasons why something may not be covered under warranty that is common with many vape brands.
These are some of the reasons why a warranty may not apply
- Liquid damage to board or screen
- Drops or falls ( damage to the case or internals of a device)
- Modifications performed other than the manufacturer
How To Maintain A Rebel Vape Mod
Some people will ask if there is any special process needed to maintain a clean finish to a Rebel Mod, there are a few things that anyone can do very easily.
- To regularly wiping down the devices with a medical wipe will clean and remove most liquid and dust from the device.
- Not to over tighten an atomizer to the device this can over time damage the device.
- Try not to charge batteries through the board as this can cause unnecessary wear on the USB port if possible use an external charger like a Nitecore or E-fest charger these types of chargers can be easily available and are also very affordable.
What Do Reviewers Say About Rebel Mods?
Rebel Vape Reviews:
Rebel vape has been creating many different 3d printed devices since they are established with many very happy customers having multiple Rebel mods. Jai Haze, Grimm Green, Suck My Mod, Ruby Roo have all hand their hands on Rebel mods, and the feedback has been good.
Here are some reviews left by customers:
This review was left by a customer who purchases a Rebel Vape DNA 60 mod. Giving it 5 Stars
“Ordered on 5/8/2021 received on 5/18/2021. Mint condition, the battery fits perfectly with no rattle, doors are tight. This thing is a work of art THANK YOU for my 4th REBAL MOD with (No issues) my ether rta n my QP gata work perfectly REBALVAPER4LIFE”
This review from another customer that purchased a Rebel Vape 250c In-line dual 18650 left this review on the rebel vape website. Also giving the product 5 Stars.
“Don’t hesitate to order this mod. Super Lightweight, very attractive. The fit and finish was excellent. Customer service was superb as well, email replies were fast and friendly. I will definitely be ordering another mod or two Within the next month as this one is awesome.”
Even though Rebel devices can cost from $120 – $320 depending on the model, the price is reflective of the quality and components. There are many happy customers using them around the world.
It can be easily seen that Rebel Vape has some devoted customers that truly love their designs, styles, and quality of their products. Not to mention the Evolv DNA and YiHi chipsets.
Final Thoughts:
Rebel Vape continues to make some truly great products and offers different styles to fit the customer’s style and way of vaping from small and compact to larger with more power.
Some would say that Rebel Vape is overpriced however with each device being hand-built and finished they can easily be said they are worth the money.
Should You Buy A Rebel Mod?
It can easily be said that rebel vape although is not as well known as lost vape or Dovpo they are a brand to look in to especially if you want light and still powerful devices.
